0 item(s)

YOUR CART

Kingston 4GB DDR3 1600 MHz RAM

Kingston 4GB DDR3 1600 MHz RAM

0 Customer Review
  • Brand: Kingston
  • Product Code: Kingston 4GB DDR3 1600 MHz RAM
  • Availability: In Stock

Description

  • Capacity- 4GB
  • 800MHz fCK for 1600Mb/sec/pin
  • 8 independent internal bank
  • CAS Latency: 11, 10, 9, 8, 7, 6
  • View More Info
3,000

Specification:

Brand & Model
BrandKingston
ModelKingston
Details
Capacity4GB
TypeDDR3
Speed1600 MHz
Voltage1.5V
Recommended UseRegular
SupportDesktop

Description

Kingston 4GB DDR3 1600 MHz RAM

This document describes ValueRAM's 512M x 64-bit (4GB). DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory,module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers.

Specification :

  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 800MHz fCK for 1600Mb/sec/pin
  •  8 independent internal bank
  •  Programmable CAS Latency: 11, 10, 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with
  • starting address “000” only), 4 with tCCD = 4 which does not
  • allow seamless read or write [either on the fly using A12 or
  • MRS]
  • Bi-directional Differential Data Strobe
  • nternal(self) calibration : Internal self calibration through ZQ
  • pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C,
  • 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • PCB : Height 1.180” (30.00mm), single sided component


Reviews (0) :

Get specific details about this product from customers who own it.

Write your review

 Bad           Good